Cameo Code - User contributions [en]

About

2021-02-25T05:52:32Z

Skalogryz: /* Out Products */

==What We Do==
* Custom software development and maintenance
* Long-term support of existing code base (Pascal, Delphi)
* [[Stingray System]] support (maintenance and new development)
* [https://www.ghostdraft.com Ghostdraft] Documents project development and maintenance

==Contact Us==
Cameo Code LLC

4801 Glenwood Ave Suite 200

Raleigh, NC 27612

Email: [mailto://support@cameocode.com support@cameocode.com]
==Our Products==
* [[BlueTool]] - specialized tool for Stingray system a desktop VRM editor.

BlueTool

2021-02-19T06:15:17Z

Skalogryz: /* Download */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe?t=2/19/2021 Version 02/19/2021] [[BlueTool/Release Notes#2/19/2021|Release Notes]]

* Prior versions:
:* [https://cameocode.com/w/resources/assets/bt/07-01-2020/bluetool-setup.exe Version 07/01/2020]

==License==
* Totally free for the commercial or other use.

==Quick User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
The ways to connect components:
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''

===Applying Changes===
The tool only saves a VRM file, it doesn't recompile it.

In order for the changes to take effect you need to restart Stingray.

BlueTool

2021-02-19T06:14:45Z

Skalogryz: /* Download */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 02/19/2021] [[BlueTool/Release Notes#2/19/2021|Release Notes]]

* Prior versions:
:* [https://cameocode.com/w/resources/assets/bt/07-01-2020/bluetool-setup.exe Version 07/01/2020]

==License==
* Totally free for the commercial or other use.

==Quick User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
The ways to connect components:
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''

===Applying Changes===
The tool only saves a VRM file, it doesn't recompile it.

In order for the changes to take effect you need to restart Stingray.

BlueTool

2021-02-19T06:14:12Z

Skalogryz: /* Download */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 02/19/2021]

* Older versions:
* [https://cameocode.com/w/resources/assets/bt/07-01-2020/bluetool-setup.exe Version 07/01/2020]

==License==
* Totally free for the commercial or other use.

==Quick User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
The ways to connect components:
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''

===Applying Changes===
The tool only saves a VRM file, it doesn't recompile it.

In order for the changes to take effect you need to restart Stingray.

BlueTool

2021-02-19T06:14:03Z

Skalogryz: /* Download */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 02/19/2021]
* Older versions:
* [https://cameocode.com/w/resources/assets/bt/07-01-2020/bluetool-setup.exe Version 07/01/2020]

==License==
* Totally free for the commercial or other use.

==Quick User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
The ways to connect components:
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''

===Applying Changes===
The tool only saves a VRM file, it doesn't recompile it.

In order for the changes to take effect you need to restart Stingray.

BlueTool/Release Notes

2021-02-19T06:13:13Z

Skalogryz: /* 7/01/2020 */

==2/19/2021==
* added support for SQLTRN component
* added reference to the online help page
==7/01/2020==
* the first official release
==Links==
* [[BlueTool]]

BlueTool/Release Notes

2021-02-19T06:13:05Z

Skalogryz: /* 2/19/2021 */

==2/19/2021==
* added support for SQLTRN component
* added reference to the online help page
==7/01/2020==
* the first official release
* [[BlueTool]]

BlueTool/Release Notes

2021-02-19T06:12:52Z

Skalogryz: /* 2/19/2021 */

==2/19/2021==
* added support for SQLTRN component
* added reference to the online help page
==7/01/2020
* the first official release

BlueTool/Release Notes

2021-02-19T06:12:32Z

Skalogryz: Created page with "==2/19/2021== * added support for SQLTRN component * added reference to the online help page"

==2/19/2021==
* added support for SQLTRN component
* added reference to the online help page

BlueTool

2021-02-12T16:44:26Z

Skalogryz: /* Quick User Manual */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==License==
* Totally free for the commercial or other use.

==Quick User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
The ways to connect components:
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''

===Applying Changes===
The tool only saves a VRM file, it doesn't recompile it.

In order for the changes to take effect you need to restart Stingray.

BlueTool

2021-02-12T05:29:21Z

Skalogryz: /* License */

BlueTool

2021-02-12T05:28:50Z

Skalogryz: /* User Manual */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==License==
* Totally free for the commercial use. There's no evaluation period. Just feel free to use it.

==Quick User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
The ways to connect components:
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''

BlueTool

2021-02-12T05:28:35Z

Skalogryz: /* Known Issues */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==License==
* Totally free for the commercial use. There's no evaluation period. Just feel free to use it.

==User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''

BlueTool

2021-01-26T04:52:02Z

Skalogryz: /* Download */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==License==
* Totally free for the commercial use. There's no evaluation period. Just feel free to use it.

==User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''
==Known Issues==
* display of some UI elements might be wrong on DPI other than 100%

About

2021-01-26T04:51:25Z

Skalogryz: /* Software */

==What We Do==
* Custom software development and maintenance
* Long-term support of existing code base (Pascal, Delphi)
* [[Stingray System]] support (maintenance and new development)
* [https://www.ghostdraft.com Ghostdraft] Documents project development and maintenance

==Contact Us==
Cameo Code LLC

4801 Glenwood Ave Suite 200

Raleigh, NC 27612

Email: [mailto://support@cameocode.com support@cameocode.com]
==Out Products==
* [[BlueTool]] - specialized tool for Stingray system a desktop VRM editor.

About

2021-01-26T04:51:18Z

Skalogryz: /* What we do */

==What We Do==
* Custom software development and maintenance
* Long-term support of existing code base (Pascal, Delphi)
* [[Stingray System]] support (maintenance and new development)
* [https://www.ghostdraft.com Ghostdraft] Documents project development and maintenance

==Contact Us==
Cameo Code LLC

4801 Glenwood Ave Suite 200

Raleigh, NC 27612

Email: [mailto://support@cameocode.com support@cameocode.com]
==Software==
* [[BlueTool]] - specialized tool for Stingray system a desktop VRM editor.

BlueTool

2021-01-26T04:50:32Z

Skalogryz: /* User Manual */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "gray arrow".
:''click on the empty space to disconnect the component''
==Known Issues==
* display of some UI elements might be wrong on DPI other than 100%

BlueTool

2021-01-26T04:50:03Z

Skalogryz: /* User Manual */

Blue tool

2021-01-26T04:47:36Z

Skalogryz: Redirected page to BlueTool

#REDIRECT[[BlueTool]]

About

2021-01-26T04:47:24Z

Skalogryz: /* Software */

==What we do==
* Custom software development and maintenance
* Long-term support of existing code base (Pascal, Delphi)
* [[Stingray System]] support (maintenance and new development)
* [https://www.ghostdraft.com Ghostdraft] Documents project development and maintenance

==Contact Us==
Cameo Code LLC

4801 Glenwood Ave Suite 200

Raleigh, NC 27612

Email: [mailto://support@cameocode.com support@cameocode.com]
==Software==
* [[BlueTool]] - specialized tool for Stingray system a desktop VRM editor.

BlueTool

2021-01-26T04:47:12Z

Skalogryz: Skalogryz moved page Bluetool to BlueTool: proper case

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "right arrow".
:click anywhere to disconnect the component

Bluetool

2021-01-26T04:47:12Z

Skalogryz: Skalogryz moved page Bluetool to BlueTool: proper case

#REDIRECT [[BlueTool]]

BlueTool

2021-01-26T04:46:17Z

Skalogryz: /* Brief Description */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==User Manual==
[[Image:Bt screen1.png|thumb|Main Window]]
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "right arrow".
:click anywhere to disconnect the component

BlueTool

2021-01-26T04:44:42Z

Skalogryz: /* Brief Description */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==Brief Description==
[[Image:Bt screen1.png|thumb|Main Window]]
*Shift + Left-Click to connect "blue arrow"
*Shift + Right-click to connect "right arrow".
:click anywhere to disconnect the component

BlueTool

2021-01-26T04:44:03Z

Skalogryz: /* Download */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
==Brief Description==
*Shift +Left-Click to connect "blue arrow"
*Shift +Right-click to connect "right arrow".
:click anywhere to disconnect the component

File:Bt screen1.png

2021-01-26T04:42:34Z

Skalogryz: Skalogryz uploaded a new version of File:Bt screen1.png

BlueTool

2021-01-26T04:37:57Z

Skalogryz: /* Download */

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]

BlueTool

2021-01-26T04:37:47Z

Skalogryz:

Bluetool is a desktop editor of VRM files used by Stingray system.
==Download==
* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]
[[Image:Bt_screen1.png]]

File:Bt screen1.png

2021-01-26T04:37:33Z

Skalogryz:

BlueTool

2021-01-26T04:35:40Z

Skalogryz:

* [https://cameocode.com/w/resources/assets/bluetool-setup.exe Version 7/1/2020]

BlueTool

2021-01-26T04:35:29Z

Skalogryz:

* [./w/resources/assets/bluetool-setup.exe Version 7/1/2020]

BlueTool

2021-01-26T04:32:03Z

Skalogryz: Created page with "* [Version 7/1/2020]"

* [Version 7/1/2020]

Stingray System

2021-01-26T04:31:13Z

Skalogryz: /* Tasks Tracking */

Stingray System is a policy and claim admin system (with optional billing modules provided). The system is easily customizable, thus finding knowledgeable developers might be hard.

But this is where we can help!
==Start of Development==
If you decided to work with us, there are a few points that needs to be resolved through Sapiens.
* if the code repository is hosted at Sapiens, you'll need request for read/write '''access''' on our behalf.
* the '''database''' snapshot is required that is suitable for the current version of code
* if Sapiens is hosting your server:
:*point of contact needs to be identified, where a update information needs to be sent to. You can be such point of contact if desired.
* if you're hosting yourself
:*we'll provide you with the update information for your environment

==Tasks Tracking==
* you will be provided with the access to the task tracking system
==Our Software==
* [[Bluetool]]

About

2021-01-26T04:30:53Z

Skalogryz: /* Contact Us */

==What we do==
* Custom software development and maintenance
* Long-term support of existing code base (Pascal, Delphi)
* [[Stingray System]] support (maintenance and new development)
* [https://www.ghostdraft.com Ghostdraft] Documents project development and maintenance

==Contact Us==
Cameo Code LLC

4801 Glenwood Ave Suite 200

Raleigh, NC 27612

Email: [mailto://support@cameocode.com support@cameocode.com]
==Software==
* [[Bluetool]] - specialized tool for Stingray system a desktop VRM editor.

CSU/Ghostdraft

2021-01-08T05:38:05Z

Skalogryz: /* Importing the File */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Unbundling the Project==
* Run the studio
* File -> Open Project
* Select the bundle file. (Unbundling will take a few seconds)
* File -> Save All
==Bundling the Project==
Bundling is required in order to give the changes back.
* File -> Bundle project
* specify the file name and hit ok.

==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

After rename click File -> Save All

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form
*Press Ctrl-A to select the entire contents of the section (it's needed to avoid dummy line breaks)
*Press Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

Once all sections were copied over, replace the copied Form Number and Edition date (CG 04 40 11 03), with the actual form number and edition date.

* Pay special attention to replacing all the numbers (First page header, First page footer, Left page footer and Right page footer).
* Make sure that the copyright notice is matching the original template, if it's NOT you might want to copy the text from the original template.
[[Image:Restoreedition.png]]
====Font and Styling====
Depending on how the original document was created, it might be that during the conversion process the fonts might get corrupted or misplaced.

The typical formatting of ISO form is as following:
* Content font - Arial, 10pt
* Header font - Arial (Bold), 18 pt
* "This endorsement changes..." font - Arial (Bold), 12 pt

Mixing fonts (especially with Times New Roman) is undesired.

CSU/Ghostdraft

2021-01-08T05:37:41Z

Skalogryz: /* Unbundling the Project */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Unbundling the Project==
* Run the studio
* File -> Open Project
* Select the bundle file. (Unbundling will take a few seconds)
* File -> Save All
==Bundling the Project==
Bundling is required in order to give the changes back.
* File -> Bundle project
* specify the file name and hit ok.

==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form
*Press Ctrl-A to select the entire contents of the section (it's needed to avoid dummy line breaks)
*Press Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

Once all sections were copied over, replace the copied Form Number and Edition date (CG 04 40 11 03), with the actual form number and edition date.

* Pay special attention to replacing all the numbers (First page header, First page footer, Left page footer and Right page footer).
* Make sure that the copyright notice is matching the original template, if it's NOT you might want to copy the text from the original template.
[[Image:Restoreedition.png]]
====Font and Styling====
Depending on how the original document was created, it might be that during the conversion process the fonts might get corrupted or misplaced.

The typical formatting of ISO form is as following:
* Content font - Arial, 10pt
* Header font - Arial (Bold), 18 pt
* "This endorsement changes..." font - Arial (Bold), 12 pt

Mixing fonts (especially with Times New Roman) is undesired.

CSU/Ghostdraft

2021-01-08T05:37:06Z

Skalogryz: /* Importing ISO Template */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Unbundling the Project==
* Run the studio
* File -> Open Project
* Select the bundle file. (Unbundling will take a few seconds)
* File -> Save All

==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form
*Press Ctrl-A to select the entire contents of the section (it's needed to avoid dummy line breaks)
*Press Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

Once all sections were copied over, replace the copied Form Number and Edition date (CG 04 40 11 03), with the actual form number and edition date.

* Pay special attention to replacing all the numbers (First page header, First page footer, Left page footer and Right page footer).
* Make sure that the copyright notice is matching the original template, if it's NOT you might want to copy the text from the original template.
[[Image:Restoreedition.png]]
====Font and Styling====
Depending on how the original document was created, it might be that during the conversion process the fonts might get corrupted or misplaced.

The typical formatting of ISO form is as following:
* Content font - Arial, 10pt
* Header font - Arial (Bold), 18 pt
* "This endorsement changes..." font - Arial (Bold), 12 pt

Mixing fonts (especially with Times New Roman) is undesired.

CSU/Ghostdraft

2021-01-08T05:32:09Z

Skalogryz: /* Font and Styling */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form
*Press Ctrl-A to select the entire contents of the section (it's needed to avoid dummy line breaks)
*Press Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

Once all sections were copied over, replace the copied Form Number and Edition date (CG 04 40 11 03), with the actual form number and edition date.

* Pay special attention to replacing all the numbers (First page header, First page footer, Left page footer and Right page footer).
* Make sure that the copyright notice is matching the original template, if it's NOT you might want to copy the text from the original template.
[[Image:Restoreedition.png]]
====Font and Styling====
Depending on how the original document was created, it might be that during the conversion process the fonts might get corrupted or misplaced.

The typical formatting of ISO form is as following:
* Content font - Arial, 10pt
* Header font - Arial (Bold), 18 pt
* "This endorsement changes..." font - Arial (Bold), 12 pt

Mixing fonts (especially with Times New Roman) is undesired.

CSU/Ghostdraft

2021-01-08T05:31:46Z

Skalogryz: /* Font and Styling */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form
*Press Ctrl-A to select the entire contents of the section (it's needed to avoid dummy line breaks)
*Press Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

Once all sections were copied over, replace the copied Form Number and Edition date (CG 04 40 11 03), with the actual form number and edition date.

* Pay special attention to replacing all the numbers (First page header, First page footer, Left page footer and Right page footer).
* Make sure that the copyright notice is matching the original template, if it's NOT you might want to copy the text from the original template.
[[Image:Restoreedition.png]]
====Font and Styling====
Depending on how the original document was created, it might be that during the conversion process the fonts might get corrupted or misplaced.

The typical formatting of ISO form is as following:
* Content font - Arial, 10pt
* Header font - Arial (Bold), 18 pt
* "This endorsement changes..." font - Arial (Bold), 12 pt

CSU/Ghostdraft

2021-01-08T05:30:25Z

Skalogryz: /* Header and Footer Adjustment */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form
*Press Ctrl-A to select the entire contents of the section (it's needed to avoid dummy line breaks)
*Press Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

Once all sections were copied over, replace the copied Form Number and Edition date (CG 04 40 11 03), with the actual form number and edition date.

* Pay special attention to replacing all the numbers (First page header, First page footer, Left page footer and Right page footer).
* Make sure that the copyright notice is matching the original template, if it's NOT you might want to copy the text from the original template.
[[Image:Restoreedition.png]]
====Font and Styling====
Depending on how the original document was created, it might be that during the conversion process the fonts might get corrupted or misplaced.

The typical formatting of ISO form is as following:
* Form content font - Arial, 10pt
* Form header font - Arial (Bold), 18 pt

CSU/Ghostdraft

2021-01-08T05:28:37Z

Skalogryz: /* Header and Footer Adjustment */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form
*Press Ctrl-A to select the entire contents of the section (it's needed to avoid dummy line breaks)
*Press Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

Once all sections were copied over, replace the copied Form Number and Edition date (CG 04 40 11 03), with the actual form number and edition date.

* Pay special attention to replacing all the numbers (First page header, First page footer, Left page footer and Right page footer).
* Make sure that the copyright notice is matching the original template, if it's NOT you might want to copy the text from the original template.
[[Image:Restoreedition.png]]

File:Restoreedition.png

2021-01-08T05:26:51Z

Skalogryz:

CSU/Ghostdraft

2021-01-08T05:23:06Z

Skalogryz: /* Header and Footer Adjustment */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form
*Press Ctrl-A to select the entire contents of the section (it's needed to avoid dummy line breaks)
*Press Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

CSU/Ghostdraft

2021-01-08T05:21:19Z

Skalogryz: /* Header and Footer Adjustment */

This is the guidelines on converting forms Word templates into Ghostdarft documents
==Ghostdraft Version==
The Ghostdraft studio to be used should be version 4.7 or 4.6.

[[Image:Version.png]]

The earlier versions of Ghostdraft down to 4.0. should also work fine.

The later versions (5.0+) might be incompatible and require an careful check.
==Importing ISO Template==

===Converting To Rich-Text Format===
Each Word template that needs to imported into Ghostdraft, must be converted to Rich-Text Format first.

In order to do that, open the file in Microsoft Word.

Select "File->Save as" and the select "Browse".

The file saving dialog will open. In the dialog you should change the value of "Save as type:" drop down to "Rich Text Format".

'''IMPORTANT:''' after save, close the file in Microsoft Word. Otherwise Ghostdraft will not be able to import the file.

No other file can be used by Ghostdraft during importing.

[[Image: Rtf.png]]

===Location===
All ISO forms are stored under '''Documents'''->'''Forms''' folder.

[[Image:Documents.png]]

===Importing the File===
In order to import the file, one can simply drag and drop the file under '''Forms''' folder.

Make sure the file you are dragging is Rich Text Format.

[[Image:Draganddrop.png]]

When you drop the file under '''Forms''' folder, you should see the dialog popup.

[[Image:Popup.png]]

Answer "Yes".

As a result, the new file template should show up in the list of forms:

[[Image:Newform.png]]

'''Important:''' Change the file name (Right click->Rename). The file name must consist only form prefix and edition date.

For example
:CG 01 34 08 03 - Missouri Changes-Pollution Exclusion
must be
:CG 01 34 08 03

If the file name doesn't have an edition date, it must be added! (Identifying the proper form edition by edition date is critical!)

[[Image:Proper_name.png]]

===Basic Formatting Changes===
The following formatting changes must be implemented in order for the form to look nice when printed during Stingray.

The same formatting changes apply to all the forms.

====Markup View====
You should be working in '''Markup view''' mode, when updating the forms formatting (using Layout view might actually hide structure details from you).

[[Image:Markupview.png]]

====Page Setup====
Click '''File''' -> '''Page setup...''' and make sure that the page settings as following:

'''Margins:'''
:Left: 0.75"
:Top: 0.75"
:Bottom: 0.96"
:Right: 0.75"

[[Image:Pagesetup-margins.png]]

'''Layout:'''
:Different first page header and footer. (this is especially important for multi-page forms)
:Left and right page header and footer.
:From Edge
::Header: 0.75"
::Footer: 0.17"

[[Image:Pagesetup-layout.png]]

====Header and Footer Adjustment====
As a result of the Layout changes made above, the original footer and header for the form are likely to disappear.

This is the expected and desired result.

[[Image:Footerheader.png]]

The footer and headers are expected to contain dynamic contents.

The content for "First page header", "First page footer", "Left page header", "Left page footer", "Right page header" and "Right page footer" should be copied from the form '''CG 04 40 11 03'''

The easiest way to do that is the following.
*Open '''CG 04 40 11 03'' (by double clicking on it).
*Switch to '''Markup view'''
*Click anywhere at "First page header" of the form
*On your keyboard hit Ctrl-A to select the entire contents of the section

[[Image:Copypastefooter.png]]

*On your keyboard hit Ctrl-C to copy the contents
*Switch back to the form you're importing.
*Click anywhere at "First page header" section of the form. (it should be empty)
*Click Ctrl-V to paste the entire form.
*Repeat those steps for the remaining 5 sections.

File:Copypastefooter.png

2021-01-08T05:19:09Z

Skalogryz:

CSU/Ghostdraft

2021-01-08T05:17:25Z

Skalogryz: /* Header and Footer Adjustment */

CSU/Ghostdraft

2021-01-08T05:16:03Z

Skalogryz: /* Header and Footer Adjustment */

CSU/Ghostdraft

2021-01-08T05:15:18Z

Skalogryz: /* Header and Footer Adjustement */

File:Footerheader.png

2021-01-08T05:14:52Z

Skalogryz:

CSU/Ghostdraft

2021-01-08T05:10:46Z

Skalogryz: /* =Header and Footer Adjustement */